Tools + Apps

TurboCharger Energy Analysis

The Turbocharger Energy Analysis tool allows you to quickly and easily calculate the boost provided by the Advanced TurboCharger in your plant. It is meant to assist you with the preliminary design. Results may vary. Please contact us for your specific design requirements.

Input

(m3/hr)
(m3/hr)
(bar)
(bar)
(bar)
(bar)
English Metric

Turbo Performance*

Turbo Charger Model:
Turbo Charger Size:
H: Permeate Flow:
G: Pump Discharge Pressure:

Congratulations! Now that you have sized the TurboCharger to your plant, check out our AquaBold HPP Selector to incorporate the Energy Recovery AquaBold into your plant. Go now

Specific Energy Consumption:
Energy Savings:
Boost


Want to learn more? Our global support team can help design an energy saving solution for you today. Contact Us.

Term Definitions

Kilowatt: The kilowatt is equal to one thousand (10^3) watts and is expressed like this: kWh. This unit is typically used to express the output power of engines and the power of electric motors, tools, machines, and heaters.

TurboCharger: A turbocharger, or turbo, is a forced induction device used to allow more power to be produced by an engine of a given size. A turbocharged engine can be more powerful and efficient than a naturally aspirated engine because the turbine forces more air, and proportionately more fuel, into the combustion chamber than atmospheric pressure alone.

gpm: A unit of volumetric flow rate meaning gallons per minute.

psi: A unit of pressure meaning pounds per square inch.

m^3/hr: Unit of measurement for the movement of a volume of gas (cmh) or liquid per unit of time.

bar: Metric unit of atmospheric pressure equal to 14.50 pounds per square inch (lb/in2), 1.02 kilograms per square centimeter (kg/cm2).

Feed Flow: Product flow to the membranes

Brine Flow: Concentrate/reject flow exiting the membrane

Pump Suction Pressure: Suction pressure to the high pressure feed pump

Required Membrane Pressure: Fluid pressure required by the membrane

Brine Pressure: Concentrate/reject pressure exiting the membrane

Turbo Exhaust Pressure: Turbo exhaust pressure from the Turbo Charger

error
It looks like the TurboCharger is providing more boost than your system requires due to the high efficiency of the device.

Please contact us to find a solution that best fits your requirements.
Disclaimer:

Energy Rate calculation uses industry standard centrifugal pump efficiencies. When you add your value to the Turbo Exhaust Pressure, we recommend a minimum of 1 bar. Energy Savings assumes an existing pump efficiency of 75%.